Keep Your Battery Clean To Be Safe

Was there actually a time when your vehicle was in need of jumpstarting, and your battery was barely visible through all the gunk? If you were wondering what the glop was, it was battery oxidation, formed by acid condensation. It can be cleaned using a basic chemical solution, since it has been formed by an acid. A familiar household product, namely baking soda, can clean battery acid very easily. You'll want to be cautious when doing it but there are just a couple of instructions on how to clean your battery.

The very first thing you must do is to find the necessary supplies, which you may already have at home. Protective glasses are nice to have for protecting your eyes, a box of baking soda is a necessary ingredient, adjustable pliers and screwdriver, with insulated handles, and a stiff-bristled brush to begin with. Some open-end and box wrenches, a plastic or steel scraper, cleaning brushes for a battery terminal, and a turkey baster or maybe small funnel. It is also important to have a pail of water,rubber gloves, spray-on household cleaner and some sponges or clean cloths. This might seem like lots of things for cleaning a battery, but we did say doing it safely.

You'll have to have the safety glasses and rubber gloves to protect yourself from the sulfuric acid that's contained in the corrosive deposits. Be careful to never get the deposits on the car since it could damage the car's paint job. How much you must clean the battery is determined by how much corrosion it has. If you'd like the battery to be very clean, you've got to remove the battery from the vehicle. For your primary cleaning, you use the scraper and the bristle brush to remove as much of the dirt and corrosion as you can.

The next thing is to create a mixture of one tablespoon of baking soda to a pint of water, and take the turkey baster, and carefully apply the solution to the outside of the battery, along with the cable connections. After that you can use the bristle brush to loosen and remove the debris from the battery and you want to remove the cables so that cleaning will be easier. If disconnecting the battery pack, be sure to use the pliers or wrenches to loosen the connection and take them off with negative first then positive. For your terminals and any other parts, utilize the brush again to remove the corrosion and do a flush using the baking soda solution.

So now use the liquid cleaner within the spray bottle, and a sponge to get rid of the remaining dirt and grease. After that, dry off all the components with a clean cloth and reassemble everything plus be sure that the cable is connected positive first. Make sure things are all secure and you finally have a clean, safe battery.

Leave a Reply

Your email address will not be published. Required fields are marked *